Dedicated Subsystem WorkbenchPlatform Gen: 2021–2026

sms%3A6572176457 Ducati Multistrada V4 / V4 S / Pikes Peak / Rally Fastener Torque Specs & Tightening Matrix

Factory torque specs for sms%3A6572176457 Ducati Multistrada V4 / V4 S / Pikes Peak / Rally: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Technical PassportOEM VERIFIED

Engine

1158cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

4.00 L (4.23 US qt)

Spark Plug

NGK RMAR9A-10

Front Tire

120/70 ZR19 (120/70 ZR17 on Pikes Peak)

Browse Flagship Teardowns →

Gen 2021–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2021 through 2026.

Select Model Year:(Active: sms%3A6572176457)
6 Production Years (2021–2026)

2021 2022 2023 2024 2025 2026

Suggested Items6 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Suggested Items · You Might Be Interested In

Suggested Items & Workshop Consumables for this Fastener & Chassis Torque Job

Task-critical chemicals, precision tools, and replacement consumables dynamically matched to the sms%3A6572176457 Ducati Multistrada V4 / V4 S / Pikes Peak / Rally factory engineering specifications.

6 Verified Products Found

CRITICAL THREADLOCKER

PERMATEXIn Stock

PERMATEX Gel Threadlocker - Blue

Prevents critical engine, brake caliper, and sprocket fasteners from backing out under severe harmonic vibration.

$14.99USD

ANTI-SEIZE LUBRICANT

MOTOREXIn Stock

MOTOREX COPPER ANTI-SEIZE SPRAY

Prevents galling, galvanic corrosion, and thread seizure on spark plug threads, exhaust studs, and axle pinch bolts.

$18.50USD

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

PRECISION DRIVE TOOL

JIMSIn Stock

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

Precision chrome vanadium metric drive tool to torque fasteners to factory spec without rounding fastener heads.

$27.90USD

CALIPER REBUILD ESSENTIAL

EBC BRAKESIn Stock

EBC Standard Brake Pads

Direct replacement high-friction pads required when servicing and re-torquing front or rear brake caliper assemblies.

$24.72USD

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

ROTOR & THREAD CLEANER

DRAG SPECIALTIESIn Stock

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

Zero-residue fast-evaporating solvent to strip old thread compound, grease, and brake dust from fastener threads.

$8.95USD

FINAL DRIVE LUBRICANT

MOTULIn Stock

MOTUL CHAIN LUBE ROAD 400ML

High-tack synthetic lubricant required when torquing rear axle nuts and setting final drive chain tension.

$15.00USD

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
Engine Stressed Mounting Studs & Subframe Bolts (M10/M12) M10/M12• 14mm / 17mm socket• Loctite 243 (medium strength)	60 N·m (44.3 ft-lb)	RECALL 21V-212: Engine exchange replacement procedure; torque in criss-cross sequence WARNING: CR207: Engine is fully stressed chassis member. Suggested Item:PERMATEX Gel Threadlocker - Blue ($14.99) →	Chassis
Swingarm Pivot Axle Nut (M18×1.5) M18x1.5• 26mm socket• Shell Retinax HDX2 grease on shaft body	130 N·m (95.9 ft-lb)	Inspect needle bearings and dust seals before axle slide WARNING: Critical suspension pivot fastener. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Chassis
Rear Wheel Nut (Double-Sided Swingarm M25×1.25) M25x1.25• 32mm socket• Shell Retinax grease under washer	145 N·m (107 ft-lb)	Torque to 145 Nm (Pikes Peak single-sided swingarm uses M48 nut at 230 Nm) WARNING: Standard Multistrada V4 uses double-sided swingarm. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Chassis
Front Brake Caliper Radial Bolts (4x M10×1.25) M10x1.25• Torx T50• None (dry)	45 N·m (33.2 ft-lb)	Brembo Stylema calipers; alternate tightening upper/lower bolt WARNING: Life-critical fastener. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Brakes
Engine Oil Drain Plug (M12×1.5) M12x1.5• 5mm Hex• New copper washer (85250051A)	20 N·m (14.8 ft-lb)	Clean magnetic collector before reinstalling WARNING: Do not exceed 20 Nm. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Engine

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #21V212000STRUCTURE / POWERTRAIN

Received: 01/01/2021▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #SRV-RCL-21-002Safety Recall 21V-212 / CR207: Multistrada V4 & V4 S Valve Guide Metallurgy & Complete Engine Exchange

Source: RCSB-21V212-3629.pdf

Mandated Torques:Engine Stressed Mounting Studs & Subframe Bolts: 60 N·m (Loctite 243)Swingarm Pivot Axle Nut (M18x1.5): 130 N·m (Shell Retinax HDX2 grease)Exhaust Header Flange Nuts (8x M8): 24 N·m (Cuprum 320 copper grease)Cooling Radiator Screws: 10 N·m

Consumable Specs:Eni Permanent Spezial CoolantShell Retinax HDX2 Grease BCuprum 320 High-Temp Copper Anti-Seize Grease ILoctite 243 / Loctite 270 Threadlockers

Genuine Part Numbers:CR207 Pre-Matched Certified V4 Granturismo Engine Assembly889450111 (Engine Base Workshop Lifting Fixture)

NHTSA Recall 21V-212Ducati Campaign SRV-RCL-21-002 / CR207

Ducati Multistrada V4 / V4 S V4 Granturismo Valve Guide & Engine Replacement

Valve guide premature wear countermeasure: Complete engine replacement, mounting studs 60 N·m, swingarm pivot 130 N·m & DDS 3.0 diagnostic re-learning.

Factory Engine ExchangeMounts 60 N·m / Pivot 130 N·m

Campaign Specifications:CR207889450111DDS 3.0Eni Spezial