Dedicated Subsystem WorkbenchPlatform Gen: 2016–2026

sms%3A6572176457 Ducati Diavel V4 / Diavel 1260 / XDiavel Tire Sizes, Cold Pressures & Gearing Ratios

OEM tire sizes, front cold PSI (), rear cold PSI (), sprocket teeth count, final drive ratio, and chain pitch for sms%3A6572176457 Ducati Diavel V4 / Diavel 1260 / XDiavel.

Technical PassportOEM VERIFIED

Engine

1158cc

Cooling

Liquid-Cooled

Final Drive

525 (Chain models) Chain

Engine Oil

4.00 L (4.23 US qt)

Spark Plug

NGK RMAR9A-10

Front Tire

120/70 ZR17 (Pirelli Diablo Rosso III)

Browse Flagship Teardowns →

Gen 2016–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2016 through 2026.

Select Model Year:(Active: sms%3A6572176457)
11 Production Years (2016–2026)

2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items3 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Tire Engineering & Multi-Scenario Pressure Matrix

ETRTO Validated

Inflation targets calibrated across operating modes, verified rim width ranges, and certified alternate sizes.

Shop Direct-Fit Tires

Multi-Scenario Inflation Pressures

Solo Street / CommutingCold Baseline

Front: Not Available

Rear: Not Available

Two-Up Passenger & LuggageMax Load

Front: Not Available

Rear: Not Available

Off-Highway / Terrain Pressure

Maintain OEM cold baseline for street transfers; adjust -2 to -4 PSI for loose terrain.

Rim Geometry & ETRTO Envelopes

Front Wheel

OEM Rim Width:Not Available

Permissible Envelope:Not Available

Rear Wheel

OEM Rim Width:Not Available

Permissible Envelope:Not Available

Operating outside ETRTO envelope width alters crown radius, accelerates shoulder wear, and impacts lean stability.

Factory Dimensions & Verified Alternates

Factory Standard Sizes

Front:120/70 ZR17 (Pirelli Diablo Rosso III)

Rear:240/45 ZR17 (Pirelli Diablo Rosso III)

Shop In-Stock Matched 2-Tire Sets→

Verified Alternate Fitments

Factory standard sizing recommended.

Alternate profiles verified for swingarm, chain guard, and fender clearances.

Final Drive Gearing & Speed/RPM Calculator

Chain Drive (Belt Drive on XDiavel)

Factory reduction ratios, interactive sprocket gearing simulator, 6th gear cruising RPM matrix, and swingarm chain adjustment tolerances.

Launch Full Gearing Simulator Shop Hypoid Gear Oils

Drive Ratio & Torque Impact

Calculated Final RatioStock: 2.688

2.688 : 1-0.02%

Drivetrain Torque Delta

0.0% Taller Gearing (Reduced Highway RPM)

Lengthens transmission gears, lowers sustained engine RPM on motorways, and reduces engine buzz and vibration.

Countershaft Speedo Variance:+0.0%

At 70.0 mph indicated speed, true vehicle ground speed is 70.0 mph.

Cruising Engine RPM in 6th Gear

60 MPH

Stock: 3,298 RPM

3,297 RPM

-1 RPM

70 MPH

Stock: 3,848 RPM

3,847 RPM

-1 RPM

80 MPH

Stock: 4,397 RPM

4,397 RPM

Calculated using factory 6th gear ratio (0.923), primary reduction (1.681), and 240/45 ZR17 (Pirelli Diablo Rosso III) rolling circumference.

Cardan Bevel Gear Maintenance

Recommended Belt:

Shop Bevel Gear Oil Find Direct-Fit Gearing Sets

Factory Chassis Geometry

Chassis Alignment, Drive Tension & Rear Axle Calibration

Precision workshop alignment tools, dynamic drive tension tolerances, and axle spindle calibration for the sms%3A6572176457 Ducati Diavel V4 / Diavel 1260 / XDiavel.

Official NHTSA Safety Recalls & Technical Bulletins

4 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 4 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #23V620000STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND

Received: 01/01/2021▼

Defect Description

Ducati North America (Ducati) is recalling certain 2018-2020 XDiavel S and XDiavel Standard motorcycles. The side stand bracket may fail, causing the side stand to open while riding and resulting in an unexpected engine shutdown.

Safety Hazard / Consequence

Unexpected engine shutdown while riding can increase the risk of a crash or injury.

Factory Remedy & Repair Action

Dealers will install a new side stand bracket, free of charge. Owner notification letters were mailed November 1, 2023. Owners may contact Ducati customer service at 1-888-391-5446. Ducati's number for this recall is SRV-RCL-23-004.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

NHTSA #21V085000STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND

Received: 01/01/2021▼

NHTSA #16V729000STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND

Received: 01/01/2021▼

NHTSA #16V679000POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT

Received: 01/01/2021▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #SRV-RCL-21-004Safety Recall 21V-315 & 21V-335 / CR211: Monster 821 & 1200 Low-Permeation Rear Brake Hose & ABS Circuit Retrofit

Source: RCSB-21V315-8478.pdf

Mandated Torques:ABS Control Unit Special Banjo Screws (51 / 55): 25 N·m ± 5% (Certification torque)Rear Master Cylinder Special Screw (53): 25 N·m ± 5% (Certification torque)Rear Caliper Special Screw (57): 25 N·m ± 5% (Certification torque)Swinging Arm Hose Grommet Screws (47): 8 N·m ± 10%Airbox M6x25 Screws: 9 N·m ± 10%

Consumable Specs:DOT 4 High Performance Brake FluidSingle-use Copper Crush Washers (Washers B, C, E, F)Self-Locking Cable Ties (Ties 65 & 66)

Genuine Part Numbers:Brake Hose A (Master Cylinder to ABS Control Unit, Chamfered Fitting)Brake Hose D (ABS Control Unit to Rear Caliper, Reinforced Shield)Copper Sealing Washers DIN 7603

NHTSA Recall 21V-315 & 21V-335Ducati Campaign SRV-RCL-21-004 / CR211

Ducati Monster 821 / 1200 Low-Permeation Rear Brake Hose & ABS Circuit

Rear brake hydraulic circuit retrofit: Low-permeation hoses, banjo screws 25 N·m with copper crush washers, swingarm clips 8 N·m & 10x ABS activation bleed test.

Brembo / ABS Safety RecallBanjo Screws 25 N·m / Bleed 10 N·m

Recall Countermeasure Components:Brake Hose A (Master to ABS)Brake Hose D (ABS to Caliper)Copper Washers B, C, E, FSelf-Locking Ties 65 & 66