Dedicated Subsystem WorkbenchPlatform Gen: 2016–2026

2016 Ducati Diavel V4 / Diavel 1260 / XDiavel Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2016 Ducati Diavel V4 / Diavel 1260 / XDiavel: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Technical PassportOEM VERIFIED

Engine

1158cc

Cooling

Liquid-Cooled

Final Drive

525 (Chain models) Chain

Engine Oil

4.00 L (4.23 US qt)

Spark Plug

NGK RMAR9A-10

Front Tire

120/70 ZR17 (Pirelli Diablo Rosso III)

Browse Flagship Teardowns →

Gen 2016–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2016 through 2026.

Select Model Year:(Active: 2016)
11 Production Years (2016–2026)

2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items6 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Suggested Items · You Might Be Interested In

Suggested Items & Workshop Consumables for this Fastener & Chassis Torque Job

Task-critical chemicals, precision tools, and replacement consumables dynamically matched to the 2016 Ducati Diavel V4 / Diavel 1260 / XDiavel factory engineering specifications.

6 Verified Products Found

CRITICAL THREADLOCKER

PERMATEXIn Stock

PERMATEX Gel Threadlocker - Blue

Prevents critical engine, brake caliper, and sprocket fasteners from backing out under severe harmonic vibration.

$14.99USD

ANTI-SEIZE LUBRICANT

MOTOREXIn Stock

MOTOREX COPPER ANTI-SEIZE SPRAY

Prevents galling, galvanic corrosion, and thread seizure on spark plug threads, exhaust studs, and axle pinch bolts.

$18.50USD

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

PRECISION DRIVE TOOL

JIMSIn Stock

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

Precision chrome vanadium metric drive tool to torque fasteners to factory spec without rounding fastener heads.

$27.90USD

CALIPER REBUILD ESSENTIAL

EBC BRAKESIn Stock

EBC Standard Brake Pads

Direct replacement high-friction pads required when servicing and re-torquing front or rear brake caliper assemblies.

$24.72USD

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

ROTOR & THREAD CLEANER

DRAG SPECIALTIESIn Stock

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

Zero-residue fast-evaporating solvent to strip old thread compound, grease, and brake dust from fastener threads.

$8.95USD

FINAL DRIVE LUBRICANT

MOTULIn Stock

MOTUL CHAIN LUBE ROAD 400ML

High-tack synthetic lubricant required when torquing rear axle nuts and setting final drive chain tension.

$15.00USD

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
Rear Wheel Collar Nut (M48×1.5) M48x1.5• 55mm 12-point socket• Shell Retinax HD2 grease on thread & conical washer	230 N·m (170 ft-lb)	Install conical washer, torque to 230 Nm, install safety clip WARNING: Single-sided swingarm hub holding 240-width wheel. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Chassis
Eccentric Hub Pinch Clamp Screws (2x M12) M12x1.25• 10mm hex• None (dry)	35 N·m (25.8 ft-lb)	1-2-1 alternating torque sequence WARNING: Even clamping prevents bearing distortion. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Chassis
Front Brake Caliper Radial Bolts (4x M10×1.25) M10x1.25• Torx T50• None (dry)	45 N·m (33.2 ft-lb)	Brembo Stylema calipers WARNING: Life-critical fastener. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Brakes

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2016 Ducati Diavel V4 / Diavel 1260 / XDiavel platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #SRV-RCL-21-004Safety Recall 21V-315 & 21V-335 / CR211: Monster 821 & 1200 Low-Permeation Rear Brake Hose & ABS Circuit Retrofit

Source: RCSB-21V315-8478.pdf

Mandated Torques:ABS Control Unit Special Banjo Screws (51 / 55): 25 N·m ± 5% (Certification torque)Rear Master Cylinder Special Screw (53): 25 N·m ± 5% (Certification torque)Rear Caliper Special Screw (57): 25 N·m ± 5% (Certification torque)Swinging Arm Hose Grommet Screws (47): 8 N·m ± 10%Airbox M6x25 Screws: 9 N·m ± 10%

Consumable Specs:DOT 4 High Performance Brake FluidSingle-use Copper Crush Washers (Washers B, C, E, F)Self-Locking Cable Ties (Ties 65 & 66)

Genuine Part Numbers:Brake Hose A (Master Cylinder to ABS Control Unit, Chamfered Fitting)Brake Hose D (ABS Control Unit to Rear Caliper, Reinforced Shield)Copper Sealing Washers DIN 7603

NHTSA Recall 21V-315 & 21V-335Ducati Campaign SRV-RCL-21-004 / CR211

Ducati Monster 821 / 1200 Low-Permeation Rear Brake Hose & ABS Circuit

Rear brake hydraulic circuit retrofit: Low-permeation hoses, banjo screws 25 N·m with copper crush washers, swingarm clips 8 N·m & 10x ABS activation bleed test.

Brembo / ABS Safety RecallBanjo Screws 25 N·m / Bleed 10 N·m

Recall Countermeasure Components:Brake Hose A (Master to ABS)Brake Hose D (ABS to Caliper)Copper Washers B, C, E, FSelf-Locking Ties 65 & 66