Dedicated Subsystem WorkbenchPlatform Gen: 2018–2025

2023 Can-Am Maverick X3 Turbo / Turbo R Tire Sizes, Cold Pressures & Gearing Ratios

OEM tire sizes, front cold PSI (), rear cold PSI (), sprocket teeth count, final drive ratio, and chain pitch for 2023 Can-Am Maverick X3 Turbo / Turbo R.

Gen 2018–2025

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2025.

Select Model Year:(Active: 2023)

2018 2019 2020 2021 2022 2023 2024 2025

Engine

900cc

Drive

Not Available

Cooling

Liquid-Cooled with Front Intercooler

Tire Engineering & Multi-Scenario Pressure Matrix

ETRTO Validated

Inflation targets calibrated across operating modes, verified rim width ranges, and certified alternate sizes.

Shop Direct-Fit Tires

Multi-Scenario Inflation Pressures

Solo Street / CommutingCold Baseline

Front: Not Available

Rear: Not Available

Two-Up Passenger & LuggageMax Load

Front: Not Available

Rear: Not Available

Off-Highway / Terrain Pressure

Maintain OEM cold baseline for street transfers; adjust -2 to -4 PSI for loose terrain.

Rim Geometry & ETRTO Envelopes

Front Wheel

OEM Rim Width:Not Available

Permissible Envelope:Not Available

Rear Wheel

OEM Rim Width:Not Available

Permissible Envelope:Not Available

Operating outside ETRTO envelope width alters crown radius, accelerates shoulder wear, and impacts lean stability.

Factory Dimensions & Verified Alternates

Factory Standard Sizes

Front:30x10-14 (6-Ply Radial)

Rear:30x10-14 (6-Ply Radial)

Verified Alternate Fitments

Factory standard sizing recommended.

Alternate profiles verified for swingarm, chain guard, and fender clearances.

Final Drive Gearing & Speed/RPM Calculator

QRS-X CVT Belt Drive with High-Response Airflow / Selectable 2WD / 4WD with Smart-Lok

Factory reduction ratios, interactive sprocket gearing simulator, 6th gear cruising RPM matrix, and swingarm chain adjustment tolerances.

Launch Full Gearing Simulator Shop Hypoid Gear Oils

Drive Ratio & Torque Impact

Calculated Final RatioStock: 2.813

2.813 : 1

Drivetrain Torque Delta

OEM Factory Baseline Dynamics

Balanced all-around factory engineering calibrated for EPA emissions and street usability.

Countershaft Speedo Variance:0.0%

Speedometer reads true to factory calibration standards.

Cruising Engine RPM in 6th Gear

60 MPH

Stock: N/A

N/A RPM

70 MPH

Stock: N/A

N/A RPM

80 MPH

Stock: N/A

N/A RPM

Calculated using factory 6th gear ratio (0.923), primary reduction (1.681), and 30x10-14 (6-Ply Radial) rolling circumference.

Cardan Bevel Gear Maintenance

Recommended Belt:

Shop Bevel Gear Oil Find Direct-Fit Gearing Sets

Factory Chassis Geometry

Chassis Alignment, Drive Tension & Rear Axle Calibration

Precision workshop alignment tools, dynamic drive tension tolerances, and axle spindle calibration for the 2023 Can-Am Maverick X3 Turbo / Turbo R.

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2023 Can-Am Maverick X3 Turbo / Turbo R platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.