Factory Workshop SpecificationsPlatform Gen: 2018–2025

2020 Can-Am Maverick X3 Turbo / Turbo R Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2018–2025

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2025.

Select Model Year:(Active: 2020)

2018 2019 2020 2021 2022 2023 2024 2025

Engine

900cc

Drive

Not Available

Cooling

Liquid-Cooled with Front Intercooler

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2020 Can-Am Maverick X3 Turbo / Turbo R.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.7 qt (3.5 L) XPS 4-Stroke Synthetic Oil 0W-40 • Coolant: 6.0 qt (5.7 L) Pre-Mixed 50/50 Long Life • Brake: DOT 4 Synthetic

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTX20L-BS • CCA: 310

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 30x10-14 (6-Ply Radial) • Rear: 30x10-14 (6-Ply Radial)

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)3.7 qt (3.5 L) XPS 4-Stroke Synthetic Oil 0W-40

Engine Oil (Drain Only)3.2 qt (3.0 L)

Recommended Oil ViscosityXPS 0W-40 Synthetic 4-Stroke Engine Oil

Coolant System Capacity6.0 qt (5.7 L) Pre-Mixed 50/50 Long Life

Brake Fluid StandardDOT 4 Synthetic

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain PitchN/A

Chain Link CountN/A

Front Sprocket TeethN/A

Rear Sprocket TeethN/A

Final Drive ConfigurationStandard

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK LMAR9AI-8 Iridium

Electrode Spark Plug Gap0.8 mm (0.031 in)

OEM Battery Reference CodeYTX20L-BS

Battery Output & Rating12V 18Ah 310 CCA Sealed AGM

Spark Plug Inspection IntervalN/A

Wheels, Tires & Inflation Pressures

Shop Tires →

Front Tire Dimensions30x10-14 (6-Ply Radial)

Cold Front Inflation PressureN/A

Rear Tire Dimensions30x10-14 (6-Ply Radial)

Cold Rear Inflation PressureN/A

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2020 Can-Am Maverick X3 Turbo / Turbo R platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

Looking for direct-fit parts for this 2020 Maverick X3 Turbo / Turbo R?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts