Factory Workshop SpecificationsPlatform Gen: 2020–2026

2026 BMW S 1000 XR Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2020–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.

Select Model Year:(Active: 2026)

2020 2021 2022 2023 2024 2025 2026

Engine

999cc

Drive

Not Available

Cooling

Not Available

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2026 BMW S 1000 XR.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 4.0 L (4.2 US qt) • Coolant: 2.80 L (2.96 US qt) • Brake: BMW Motorrad DOT 4

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: 12V / 9Ah M-Battery / AGM

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70ZR17 (58W) • Rear: 190/55ZR17 (75W)

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)4.0 L (4.2 US qt)

Engine Oil (Drain Only)N/A

Recommended Oil Viscosity5W-40

Coolant System Capacity2.80 L (2.96 US qt)

Brake Fluid StandardBMW Motorrad DOT 4

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain PitchN/A

Chain Link Count120 Links

Front Sprocket TeethN/A

Rear Sprocket TeethN/A

Final Drive ConfigurationStandard

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK LMAR9AI-8 (Iridium)

Electrode Spark Plug GapNot Available

OEM Battery Reference Code12V / 9Ah M-Battery / AGM

Battery Output & RatingNot Available

Spark Plug Inspection IntervalN/A

Wheels, Tires & Inflation Pressures

Shop Tires →

Front Tire Dimensions120/70ZR17 (58W)

Cold Front Inflation PressureN/A

Rear Tire Dimensions190/55ZR17 (75W)

Cold Rear Inflation PressureN/A

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2026 BMW S 1000 XR platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #BMW-22V752Safety Recall SIB 11 02 22: S 1000 RR & M 1000 RR 10-Bolt Clutch Cover Angle Torque

Source: BMW_Recall22V752_RCRIT-22V752-3349.pdf

Mandated Torques:Torque: Stage 1: 3 N·m (27 in·lb) (Clutch Cover Aluminum Screws - 10x Star Sequence)Torque: Stage 2: 90° Angle of Rotation (Clutch Cover Aluminum Screws - 10x Star Sequence)Torque: 28 N·m (21 lbf·ft) (Engine Oil Drain Plug - M16 x 1.5)Torque: 11 N·m (8 lbf·ft) (Oil Filter Cartridge)

Consumable Specs:Fresh 4-Stroke Engine Oil (Thread Lubricant Mandate)Oil Drain Plug Aluminum Crush Ring A16 x 21 (07 11 9 963 252)BMW Advantec Ultimate 5W-40 Synthetic Oil

Genuine Part Numbers:11 14 8 563 76311 14 8 405 53107 11 9 963 252

NHTSA Recall 22V-752SIB 11 02 22 / Campaign 0000112800

S 1000 RR / M 1000 RR 10-Bolt Clutch Cover Angle Torque

Mandatory single-use aluminum screw replacement, engine oil thread pre-lubrication, and 2-stage torque sequence (3 N·m + 90°).

Federal Safety RemedyStage 1: 3 N·m → Stage 2: 90°

Click any numbered bolt above for strict star-pattern order, oil thread lubrication rules, and aluminum bolt stretch physics.

Factory Tightening TorquesService Manual

Clutch Cover Aluminum Screws (10x) - Stage 13 N·m (27 in-lb)

Light initial snug in strict criss-cross star sequence

Clutch Cover Aluminum Screws (10x) - Stage 290° Angle of Rotation

Single smooth 90° angular turn using digital angle gauge or protractor

Engine Oil Drain Plug (M16 × 1.5)28 N·m (21 lb-ft)

Always install new aluminum crush ring (17 × 21 mm)

Oil Filter Cartridge11 N·m (8 lb-ft)

Lube O-ring seal with fresh Advantec Ultimate 5W-40

Clutch Cable Bracket Screw (M6)8 N·m (71 in-lb)

Verify free play of 0.5 – 1.0 mm at lever pivot

Bulletin #BMW-20V476Safety Recall SIB 34 03 21: R 1250 GS & S 1000 RR Front Brake Caliper Fluid Weepage Check

Source: BMW_Recall20V476_RCRIT-20V476-8248.pdf

Mandated Torques:Torque: 38 N·m (28 lbf·ft) (Front Radial Brake Caliper Mounting Bolts - 4x M10 x 65)Torque: 24 N·m (17.7 lbf·ft) (Brake Hose Union Banjo Bolt - New Sealing Washers)Torque: 10 N·m (7.4 lbf·ft) (Caliper Air Bleeder Valve)Torque: 19 N·m (14 lbf·ft) (Front Brake Rotor Torx Screws - 5x M8)

Consumable Specs:BMW Motorrad DOT 4 Brake Fluid (83 13 2 405 977)Genuine Sealing Washers A10 x 13.5 (07 11 9 963 072)Isopropyl Alcohol Contact Cleaner

Genuine Part Numbers:34 11 7 105 63734 11 7 105 63883 13 2 405 97707 11 9 963 072

NHTSA Recall 20V-476SIB 34 03 21 / SIB 34 02 21

R 1250 GS / S 1000 RR Radial Front Brake Caliper Assembly

Radial 4-piston monobloc caliper fluid weepage check, seal groove tolerance inspection, and M10 caliper mounting torques.

Federal Safety RemedyM10 Caliper 38 N·m / Banjo 24 N·m

Click any element above for factory fluid weepage inspection criteria, banjo washer replacement, and caliper torque steps.

Factory Tightening TorquesService Manual

Front Radial Brake Caliper Bolts (4x M10 × 65)38 N·m (28 lb-ft)

Microencapsulated or medium-strength threadlocker, tighten in 2 stages

Brake Hose Union Banjo Bolt24 N·m (17.7 lb-ft)

Install between 2 new genuine copper/aluminum sealing washers

Caliper Air Bleeder Valve10 N·m (7.4 lb-ft)

Bleed with BMW Motorrad DOT 4 fluid; torque with 11mm flare wrench

Brake Pad Retaining Pin & Cotter ClipHand-set pin + clip

Inspect anti-rattle spring plate for proper directional orientation

Front Brake Disc Torx Screws (5x M8)19 N·m (14 lb-ft)

Diagonal cross-pattern tightening into wheel hub

Looking for direct-fit parts for this 2026 S 1000 XR?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts