Dedicated Subsystem WorkbenchPlatform Gen: 2019–2026

2023 BMW S 1000 RR Fuse Box Diagram, Amperages & Relay Diagnostics

Complete fuse box location, blade fuse slot mappings, ISO color codes, blown fuse symptoms and dark current parasitic drain testing for 2023 BMW S 1000 RR.

Technical PassportOEM VERIFIED

Engine

999cc

Cooling

Liquid/Oil-Cooled

Final Drive

525 Chain

Engine Oil

3.50 L (3.70 US qt)

Spark Plug

NGK LMAR9AI-8

Front Tire

120/70ZR17

Gen 2019–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2019 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available

1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2023 BMW S 1000 RR.

Configure Service Bundles→

Select Model Year:(Active: 2023)
8 Production Years (2019–2026)

2019 2020 2021 2022 2023 2024 2025 2026

CIRCUIT HEALTH DECKMain: 40A MaxiSpec: < 1.5 mA Quiescent

FUSE BOX, RELAY ASSIGNMENTS & PARASITIC DRAIN ISOLATOR

Fuse & Relay Location: Main fuse box located under rider seat forward of battery; Master 40A fuse near starter solenoid.

Select Fuse to Inspect Circuits & Failure SymptomsFormat: Mini Blade (ATM)

10A

SLOT: IGNITION

DME Engine Control

Rating: 10 Amps

Downstream Protected Components:

DME LogicIgnition Coils

Mechanic Diagnostic: Symptoms If Blown

Engine will crank but fails to fire.

Shop Replacement Fuses

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #22V752000POWER TRAIN:CLUTCH ASSEMBLY

Received: 07/10/2022▼

Defect Description

BMW of North America, LLC (BMW) is recalling certain 2022 S1000RR, M1000RR, and 2022-2023 S1000XR and S1000R motorcycles. The clutch cover bolts were not lubricated properly, which may cause the clutch cover to become loose and leak oil.

Safety Hazard / Consequence

An oil leak occurring at the clutch cover increases the risk of a crash or fire.

Factory Remedy & Repair Action

Dealers will replace all 10 clutch cover bolts, free of charge. Owner notification letters were mailed December 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #BMW-22V752Safety Recall SIB 11 02 22: S 1000 RR & M 1000 RR 10-Bolt Clutch Cover Angle Torque

Source: BMW_Recall22V752_RCRIT-22V752-3349.pdf

Mandated Torques:Torque: Stage 1: 3 N·m (27 in·lb) (Clutch Cover Aluminum Screws - 10x Star Sequence)Torque: Stage 2: 90° Angle of Rotation (Clutch Cover Aluminum Screws - 10x Star Sequence)Torque: 28 N·m (21 lbf·ft) (Engine Oil Drain Plug - M16 x 1.5)Torque: 11 N·m (8 lbf·ft) (Oil Filter Cartridge)

Consumable Specs:Fresh 4-Stroke Engine Oil (Thread Lubricant Mandate)Oil Drain Plug Aluminum Crush Ring A16 x 21 (07 11 9 963 252)BMW Advantec Ultimate 5W-40 Synthetic Oil

Genuine Part Numbers:11 14 8 563 76311 14 8 405 53107 11 9 963 252

NHTSA Recall 22V-752SIB 11 02 22 / Campaign 0000112800

S 1000 RR / M 1000 RR 10-Bolt Clutch Cover Angle Torque

Mandatory single-use aluminum screw replacement, engine oil thread pre-lubrication, and 2-stage torque sequence (3 N·m + 90°).

Federal Safety RemedyStage 1: 3 N·m → Stage 2: 90°

Click any numbered bolt above for strict star-pattern order, oil thread lubrication rules, and aluminum bolt stretch physics.

Factory Tightening TorquesService Manual

Clutch Cover Aluminum Screws (10x) - Stage 13 N·m (27 in-lb)

Light initial snug in strict criss-cross star sequence

Clutch Cover Aluminum Screws (10x) - Stage 290° Angle of Rotation

Single smooth 90° angular turn using digital angle gauge or protractor

Engine Oil Drain Plug (M16 × 1.5)28 N·m (21 lb-ft)

Always install new aluminum crush ring (17 × 21 mm)

Oil Filter Cartridge11 N·m (8 lb-ft)

Lube O-ring seal with fresh Advantec Ultimate 5W-40

Clutch Cable Bracket Screw (M6)8 N·m (71 in-lb)

Verify free play of 0.5 – 1.0 mm at lever pivot

Bulletin #BMW-20V476Safety Recall SIB 34 03 21: R 1250 GS & S 1000 RR Front Brake Caliper Fluid Weepage Check

Source: BMW_Recall20V476_RCRIT-20V476-8248.pdf

Mandated Torques:Torque: 38 N·m (28 lbf·ft) (Front Radial Brake Caliper Mounting Bolts - 4x M10 x 65)Torque: 24 N·m (17.7 lbf·ft) (Brake Hose Union Banjo Bolt - New Sealing Washers)Torque: 10 N·m (7.4 lbf·ft) (Caliper Air Bleeder Valve)Torque: 19 N·m (14 lbf·ft) (Front Brake Rotor Torx Screws - 5x M8)

Consumable Specs:BMW Motorrad DOT 4 Brake Fluid (83 13 2 405 977)Genuine Sealing Washers A10 x 13.5 (07 11 9 963 072)Isopropyl Alcohol Contact Cleaner

Genuine Part Numbers:34 11 7 105 63734 11 7 105 63883 13 2 405 97707 11 9 963 072

NHTSA Recall 20V-476SIB 34 03 21 / SIB 34 02 21