Factory Workshop SpecificationsPlatform Gen: 2019–2026

2020 BMW S 1000 RR Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Technical PassportOEM VERIFIED

Engine

999cc

Cooling

Liquid/Oil-Cooled

Final Drive

525 Chain

Engine Oil

3.50 L (3.70 US qt)

Spark Plug

NGK LMAR9AI-8

Front Tire

120/70ZR17

Gen 2019–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2019 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available

1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2020 BMW S 1000 RR.

Configure Service Bundles→

Select Model Year:(Active: 2020)
8 Production Years (2019–2026)

2019 2020 2021 2022 2023 2024 2025 2026

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2020 BMW S 1000 RR.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.50 L (3.70 US qt) • Coolant: 2.50 L (2.64 US qt) • Brake: DOT 4

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: 40A Maxi • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: 13.3:1 • Std: 180-230 PSI • Limit: 155 PSI

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTX9-BS • CCA: 135 • Regulated: 14.3 - 14.8 V DC

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70ZR17 • Rear: 190/55ZR17

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: 120 mm • Rear Travel: 117 mm

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 6,000 miles (10,000 km) mi • Valves: N/A • Plugs: Every 18,000 miles (30,000 km) mi

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)3.50 L (3.70 US qt)

Engine Oil (Drain Only)3.20 L (3.38 US qt)

Recommended Oil ViscosityBMW Motorrad Advantec Ultimate 5W-40 / 10W-40 API SN, JASO MA2

Coolant System Capacity2.50 L (2.64 US qt)

Brake Fluid StandardDOT 4

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain Pitch525

Chain Link Count118 Links

Front Sprocket Teeth17T

Rear Sprocket Teeth45T

Final Drive Configuration525 Pitch Chain

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK LMAR9AI-8

Electrode Spark Plug Gap0.8 mm (0.031 in)

OEM Battery Reference CodeYTX9-BS

Battery Output & Rating12V 8Ah 135 CCA

Spark Plug Inspection Interval18,000 miles (30,000 km) miles

Wheels, Tires & Inflation Pressures

Matched 2-Tire Sets →

Front Tire Dimensions120/70ZR17

Cold Front Inflation Pressure36 PSI (Cold)

Rear Tire Dimensions190/55ZR17

Cold Rear Inflation Pressure42 PSI (Cold)

OEM Wheel Rim Widths (F / R)3.50" / 6.00"

Verified OEM Wheel Fitment: 120/70-17 (F) + 190/55-17 (R)

Shop In-Stock Matched Pairs→

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #22V752000POWER TRAIN:CLUTCH ASSEMBLY

Received: 07/10/2022▼

Defect Description

BMW of North America, LLC (BMW) is recalling certain 2022 S1000RR, M1000RR, and 2022-2023 S1000XR and S1000R motorcycles. The clutch cover bolts were not lubricated properly, which may cause the clutch cover to become loose and leak oil.

Safety Hazard / Consequence

An oil leak occurring at the clutch cover increases the risk of a crash or fire.

Factory Remedy & Repair Action

Dealers will replace all 10 clutch cover bolts, free of charge. Owner notification letters were mailed December 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #BMW-22V752Safety Recall SIB 11 02 22: S 1000 RR & M 1000 RR 10-Bolt Clutch Cover Angle Torque

Source: BMW_Recall22V752_RCRIT-22V752-3349.pdf

Mandated Torques:Torque: Stage 1: 3 N·m (27 in·lb) (Clutch Cover Aluminum Screws - 10x Star Sequence)Torque: Stage 2: 90° Angle of Rotation (Clutch Cover Aluminum Screws - 10x Star Sequence)Torque: 28 N·m (21 lbf·ft) (Engine Oil Drain Plug - M16 x 1.5)Torque: 11 N·m (8 lbf·ft) (Oil Filter Cartridge)

Consumable Specs:Fresh 4-Stroke Engine Oil (Thread Lubricant Mandate)Oil Drain Plug Aluminum Crush Ring A16 x 21 (07 11 9 963 252)BMW Advantec Ultimate 5W-40 Synthetic Oil

Genuine Part Numbers:11 14 8 563 76311 14 8 405 53107 11 9 963 252

NHTSA Recall 22V-752SIB 11 02 22 / Campaign 0000112800

S 1000 RR / M 1000 RR 10-Bolt Clutch Cover Angle Torque

Mandatory single-use aluminum screw replacement, engine oil thread pre-lubrication, and 2-stage torque sequence (3 N·m + 90°).

Federal Safety RemedyStage 1: 3 N·m → Stage 2: 90°

Click any numbered bolt above for strict star-pattern order, oil thread lubrication rules, and aluminum bolt stretch physics.

Factory Tightening TorquesService Manual

Clutch Cover Aluminum Screws (10x) - Stage 13 N·m (27 in-lb)

Light initial snug in strict criss-cross star sequence

Clutch Cover Aluminum Screws (10x) - Stage 290° Angle of Rotation

Single smooth 90° angular turn using digital angle gauge or protractor

Engine Oil Drain Plug (M16 × 1.5)28 N·m (21 lb-ft)

Always install new aluminum crush ring (17 × 21 mm)

Oil Filter Cartridge11 N·m (8 lb-ft)

Lube O-ring seal with fresh Advantec Ultimate 5W-40

Clutch Cable Bracket Screw (M6)8 N·m (71 in-lb)

Verify free play of 0.5 – 1.0 mm at lever pivot

Bulletin #BMW-20V476Safety Recall SIB 34 03 21: R 1250 GS & S 1000 RR Front Brake Caliper Fluid Weepage Check

Source: BMW_Recall20V476_RCRIT-20V476-8248.pdf

Mandated Torques:Torque: 38 N·m (28 lbf·ft) (Front Radial Brake Caliper Mounting Bolts - 4x M10 x 65)Torque: 24 N·m (17.7 lbf·ft) (Brake Hose Union Banjo Bolt - New Sealing Washers)Torque: 10 N·m (7.4 lbf·ft) (Caliper Air Bleeder Valve)Torque: 19 N·m (14 lbf·ft) (Front Brake Rotor Torx Screws - 5x M8)

Consumable Specs:BMW Motorrad DOT 4 Brake Fluid (83 13 2 405 977)Genuine Sealing Washers A10 x 13.5 (07 11 9 963 072)Isopropyl Alcohol Contact Cleaner

Genuine Part Numbers:34 11 7 105 63734 11 7 105 63883 13 2 405 97707 11 9 963 072

NHTSA Recall 20V-476SIB 34 03 21 / SIB 34 02 21

R 1250 GS / S 1000 RR Radial Front Brake Caliper Assembly

Radial 4-piston monobloc caliper fluid weepage check, seal groove tolerance inspection, and M10 caliper mounting torques.

Federal Safety RemedyM10 Caliper 38 N·m / Banjo 24 N·m

Click any element above for factory fluid weepage inspection criteria, banjo washer replacement, and caliper torque steps.

Factory Tightening TorquesService Manual

Front Radial Brake Caliper Bolts (4x M10 × 65)38 N·m (28 lb-ft)

Microencapsulated or medium-strength threadlocker, tighten in 2 stages

Brake Hose Union Banjo Bolt24 N·m (17.7 lb-ft)

Install between 2 new genuine copper/aluminum sealing washers

Caliper Air Bleeder Valve10 N·m (7.4 lb-ft)

Bleed with BMW Motorrad DOT 4 fluid; torque with 11mm flare wrench

Brake Pad Retaining Pin & Cotter ClipHand-set pin + clip

Inspect anti-rattle spring plate for proper directional orientation

Front Brake Disc Torx Screws (5x M8)19 N·m (14 lb-ft)

Diagonal cross-pattern tightening into wheel hub

1-Click Factory Service KitOEM Spec Fluid Capacities Matched

Workshop Maintenance Kit & Factory Fluids

Authentic factory-grade motor oil, oil filter, and high-temp brake fluid matched precisely to 2020 BMW S 1000 RR capacities.

Full Kit Subtotal

$53.35

SPECS-TO-CART BUNDLESDedicated Direct-Fit Maintenance Bundles Available

Explore interactive 1-click oil change packs, brake flush kits & major tune-up bundles pre-measured for this 2020 BMW S 1000 RR.

Configure Service Bundles →

5W-40 Full Synthetic 4T

Silkolene Snow 4T Engine Oil 5W-40 (1 Liter)

1-Liter Bottles (x4 Included)

Matches factory 5W-40 spec (Oil spec: 3.50 L (3.70 US qt))

Item Price

$47.80($11.95 ea)

DOT 4 Synthetic Formula

EBC High-Performance DOT 4 Synthetic Brake Fluid

8.8 oz (250 ml) Workshop Bottle

Meets & exceeds factory DOT 4 specifications

Item Price

$5.55

Factory OEM Spark Plug Spec

NGK LMAR9AI-8

Gap: 0.8 mm (0.031 in)

Inspection milestone: 18,000 miles (30,000 km) miles. Exact factory part specification.

Authentic OEM Reference

Search OEM Plugs →

Complete Workshop Maintenance Package3 Essential Service Items

Includes 5W-40 Full Synthetic 4T engine oil (1-Liter Bottles (x4 Included)), high-flow filter & DOT 4 fluid.

Kit Total

$53.35

Looking for direct-fit parts for this 2020 S 1000 RR?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts