Dedicated Subsystem WorkbenchPlatform Gen: 2014–2020

2018 BMW S 1000 R Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2018 BMW S 1000 R: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2014–2020

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2014 through 2020.

Select Model Year:(Active: 2018)

2014 2015 2016 2017 2018 2019 2020

Engine

999cc

Drive

525

Cooling

Liquid/Oil-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.12 - 0.20 mm

0.005 - 0.008 in

Nominal Mid-Spec Target

0.16 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.12 - 0.20 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align crankshaft TDC mark with engine timing index pointer

Feeler Gauge Technique

Angled blade feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #16V948000SUSPENSION:REAR

Received: 30/12/2016▼

Defect Description

BMW North America, LLC (BMW) is recalling certain model year 2016-2017 S 1000 RR motorcycles manufactured June 8, 2016, to November 16, 2016, and 2017 S 1000 R motorcycles manufactured on October 12, 2016. One of the bolts on the rear suspension deflection lever may loosen and adversely affect the handling of the motorcycle.

Safety Hazard / Consequence

If the bolt loosens and affects the motorcycle's handling, there may be an increased risk of a crash.

Factory Remedy & Repair Action

BMW will notify owners, and dealers will replace the bolts and tighten them to the proper specifications, free of charge. The recall began February 17, 2017. Owners may contact BMW customer service at 1-800-525-7417.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.