Dedicated Subsystem WorkbenchPlatform Gen: 2019–2024

2022 BMW R 1250 GS Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2022 BMW R 1250 GS: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2019–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2019 through 2024.

Select Model Year:(Active: 2022)

2019 2020 2021 2022 2023 2024

Engine

1254cc

Drive

Chain

Cooling

Liquid/Air-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.12 - 0.20 mm

0.005 - 0.008 in

Nominal Mid-Spec Target

0.16 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.12 - 0.20 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align crankshaft TDC mark with engine timing index pointer

Feeler Gauge Technique

Angled blade feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #20V495000EQUIPMENT:OTHER:LABELS

Received: 20/08/2020▼

Defect Description

BMW of North America, LLC (BMW) is recalling certain 2021 R 1250 RT, R 1250 R, R 1250 RS, R 1250 GS and R 1250 GS Adventure motorcycles. The tire pressure labels may not remain affixed to the motorcycle frame. As a result, these motorcycles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars."

Safety Hazard / Consequence

If the label detaches from the motorcycle, proper tire pressure information may not be readily available. This could result in the rider improperly filling the tires which may affect motorcycle handling and control, increasing the risk of a crash.

Factory Remedy & Repair Action

BMW will notify owners, and dealers will replace the tire pressure label, free of charge. The recall began October 19, 2020. Owners may contact BMW customer service at 1-800-525-7417.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #23V011000POWER TRAIN:MANUAL TRANSMISSION:INTERNAL:SHAFT:INPUT

Received: 18/01/2023▼