Dedicated Subsystem WorkbenchPlatform Gen: 2013–2018

2015 BMW R 1200 GS Fuse Box Diagram, Amperages & Relay Diagnostics

Complete fuse box location, blade fuse slot mappings, ISO color codes, blown fuse symptoms and dark current parasitic drain testing for 2015 BMW R 1200 GS.

Gen 2013–2018

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2013 through 2018.

Select Model Year:(Active: 2015)

2013 2014 2015 2016 2017 2018

Engine

1170cc

Drive

Chain

Cooling

Liquid/Air-Cooled

CIRCUIT HEALTH DECKMain: 50A Maxi MasterSpec: < 1.5 mA Quiescent

FUSE BOX, RELAY ASSIGNMENTS & PARASITIC DRAIN ISOLATOR

Fuse & Relay Location: Advanced CAN-bus / LIN-bus Electronic Circuit Protection (ZFE/central chassis module monitors current semiconductor-style without conventional fuses; auto-resets on key cycle). Master 50A alternator/starter fuse located under rider seat next to battery.

Select Fuse to Inspect Circuits & Failure SymptomsFormat: Electronic Semiconductor + Master Maxi

7.5A

SLOT: DIAG

OBD2 Diagnostic & Clock

Rating: 7.5 Amps

Downstream Protected Components:

OBD2 Diagnostic SocketInstrument Cluster Clock

Mechanic Diagnostic: Symptoms If Blown

OBD diagnostic scanner will not connect; instrument clock resets.

Shop Replacement 7.5A Fuses

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #14V211000POWER TRAIN:MANUAL TRANSMISSION

Received: 18/04/2014▼

Defect Description

BMW of North America, LLC (BMW) is recalling certain model year 2013 R 1200 GS motorcycles manufactured November 2012 through August 2013. Pressure inside the transmission may cause the transmission output seal to be pushed out of place.

Safety Hazard / Consequence

If the output seal ring is pushed out of its proper position, oil may leak from the transmission onto the rear tire, increasing the risk of a crash.

Factory Remedy & Repair Action

BMW will notify owners, and dealers will fit a bracket to prevent the transmission seal from being pushed out of position, free of charge. The recall began on June 17, 2014. Owners may contact BMW customer service at 1-800-525-7417.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #21V060000FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Received: 08/02/2021▼