Dedicated Subsystem WorkbenchPlatform Gen: 2020–2026

2022 Aprilia RS 660 / Extrema / Limited Edition Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2022 Aprilia RS 660 / Extrema / Limited Edition: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Technical PassportOEM VERIFIED

Engine

659cc

Cooling

Liquid-Cooled

Final Drive

520 Chain

Engine Oil

2.70 L (2.85 US qt)

Spark Plug

NGK MR9DE-9

Front Tire

120/70 ZR17 (Pirelli Diablo Rosso Corsa II)

Browse Flagship Teardowns →

Gen 2020–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.

Select Model Year:(Active: 2022)
7 Production Years (2020–2026)

2020 2021 2022 2023 2024 2025 2026

Suggested Items6 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Suggested Items · You Might Be Interested In

Suggested Items & Workshop Consumables for this Fastener & Chassis Torque Job

Task-critical chemicals, precision tools, and replacement consumables dynamically matched to the 2022 Aprilia RS 660 / Extrema / Limited Edition factory engineering specifications.

6 Verified Products Found

CRITICAL THREADLOCKER

PERMATEXIn Stock

PERMATEX Gel Threadlocker - Blue

Prevents critical engine, brake caliper, and sprocket fasteners from backing out under severe harmonic vibration.

$14.99USD

ANTI-SEIZE LUBRICANT

MOTOREXIn Stock

MOTOREX COPPER ANTI-SEIZE SPRAY

Prevents galling, galvanic corrosion, and thread seizure on spark plug threads, exhaust studs, and axle pinch bolts.

$18.50USD

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

PRECISION DRIVE TOOL

JIMSIn Stock

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

Precision chrome vanadium metric drive tool to torque fasteners to factory spec without rounding fastener heads.

$27.90USD

CALIPER REBUILD ESSENTIAL

EBC BRAKESIn Stock

EBC Standard Brake Pads

Direct replacement high-friction pads required when servicing and re-torquing front or rear brake caliper assemblies.

$24.72USD

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

ROTOR & THREAD CLEANER

DRAG SPECIALTIESIn Stock

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

Zero-residue fast-evaporating solvent to strip old thread compound, grease, and brake dust from fastener threads.

$8.95USD

FINAL DRIVE LUBRICANT

MOTULIn Stock

MOTUL CHAIN LUBE ROAD 400ML

High-tack synthetic lubricant required when torquing rear axle nuts and setting final drive chain tension.

$15.00USD

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
No fasteners matching '' found in this category.

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #21V502000ENGINE AND ENGINE COOLING:ENGINE:CONNECTING ROD

Received: 06/28/2021▼

Defect Description

Piaggio Safety Recall PA2ZZQ2107: Connecting rod metallurgical fracture may cause catastrophic engine failure and oil leakage onto rear tire.

Safety Hazard / Consequence

Connecting rod breakage leads to engine seizure, loss of drive power, and potential fire hazard or crash.

Factory Remedy & Repair Action

Dealers will replace the complete crated engine long-block assembly (CM2966115) and installation kit (1L006293C) free of charge.

Manufacturer Notes: Piaggio Campaign Number PA2ZZQ2107. Pinion screw 50 N·m, exhaust manifold 20 N·m, oil drain 25 N·m.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #PA2ZZQ2107Safety Recall 21V-502 / PA2ZZQ2107: RS 660 & Tuono 660 Connecting Rod Breakage -> Complete Crated Engine Replacement

Source: RCRIT-21V502-0825.pdf

Mandated Torques:Engine Pinion / Countershaft Sprocket Screw (B043047): 50 N·m (37 lb-ft) (Loctite 243)Exhaust Manifold Flange Nuts (4x M8): 20 N·m (14.7 lb-ft) (new gaskets 852090)Engine Oil Drain Plug (831393): 25 N·m (18.5 lb-ft) (new crush washer)Coolant Discharge / Drain Screw (847239): 12 N·m (106 in-lb)Front & Rear Engine Hanger Frame Bolts (M10): 50 N·m (37 lb-ft)

Consumable Specs:Castrol POWER1 ULTIMATE 4T 10W-50 Synthetic Motorcycle Engine Oil (2.70 L)Castrol Radicool / ENI Antifreeze Spezial OAT Organic Coolant (1.80 L)Loctite 243 Medium-Strength Threadlocker2x Exhaust Header Gaskets (852090)

Genuine Part Numbers:CM2966115 (Factory Crated Replacement 659cc Long-Block Engine)1L006293C (Engine Replacement Installation Hardware & Gasket Kit)B043047 (Countershaft Sprocket Retaining Screw M10x1.25)852090 (Exhaust Manifold Header Gasket)

Safety Recall 21V-502 / PA2ZZQ2107Noale 660 Twin Platform