Skip to Main Content
Free Shipping Over $15030-Day Returns
800-288-0640
Free Shipping $150+30-Day Returns800-288-0640
Dedicated Subsystem WorkbenchPlatform Gen: 20142020

2018 Yamaha MT-09 Suspension Hydraulics, Fork Fluids & Sag Tuner

Front fork travel, rear shock travel, spring preload, damping click baselines, and dynamic rider sag calculator for 2018 Yamaha MT-09.

Gen 20142020

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2014 through 2020.

Select Model Year:(Active: 2018)
Engine
847cc
Drive
525
Cooling
Liquid-Cooled

Suspension Hydraulics, Fork Fluids & Interactive Sag Tuner

Showa • KYB • WP Standards
OEM hydraulic capacities, air-gap measurement standards, clicker baselines, and mathematical rider sag tuning.
Shop 41mm Fork Seals
Fork Architecture
Inverted USD Cartridge (41mm KYB Adjustable)
Oil Volume Per Leg
515 ml (17.4 US fl oz) per leg
OEM Fluid Specification
Yamaha Suspension Oil 01 (KYB 01M / SAE 5W)
Air-Gap Spec (Oil Level)
148 mm (5.83 in) compressed, spring removed
Fork Seal Dimensions
41 x 53 x 8/10.5 mm
Total Suspension Travel
Front: 137 mm • Rear: 130 mm
Target Rider Sag: 35 - 42 mm (26 - 31% of 137 mm travel)
Front Preload Baseline
2 turns in from full soft
Rebound Damping Baseline
1.5 turns out from fully seated
Compression Damping Baseline
Fixed internal cartridge circuit
Target Free Sag (Unladen)
20 - 25 mm
Enter 3-Point Sag Measurements (mm)
Suspension Sag Diagnosis & Geometry Status
Enter your extended, static, and rider measurements on the left (or select a preset) to compute exact sag percentages and spring preload recommendations.
Factory Fluid StandardDirect Spec
Maxima Racing Fork Fluid 5W (1 Liter)
Formulated with anti-foam agents and shear-stable viscosity index improvers to prevent damping fade under aggressive riding heat.
Fork & Dust Seal KitExact Stanchion Fit
All Balls Racing 41mm Fork & Dust Seal Kit
Features directional triple-lip rubber seal profile and external garter springs engineered to withstand heavy stanchion flex without weeping.
Air-Gap Tuning PhysicsBottoming Control
148 mm (5.83 in) compressed, spring removed
Trapped air column acts as a progressive spring in final 30% of stroke. Adding +5mm oil increases bottoming resistance without stiffening small bump compliance.
Recommended Maintenance Parts: Maxima Racing Fork Fluid 5W (1 Liter)All Balls Racing 41mm Fork & Dust Seal Kit

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.
NHTSA #25V248000VEHICLE SPEED CONTROL:THROTTLE:THROTTLE POSITION SENSOR (TPS)
Received: 16/04/2025
Defect Description

Pure Sports Distributing Inc. (Yamaha of Hawaii) is recalling certain 2022 MT-09 Tracer GT, 2021-2025 MT-09 SP, 2021-2025 MT-09, 2022-2023 and 2025 MT-10 SP, 2022-2024 MT-10 and 2022-2024 XSR900 motorcycles. The brushes inside the Throttle Position Sensor (TPS) may slide excessively due to improper ECU programming, possibly causing unstable idling or an engine stall.

Safety Hazard / Consequence

Unstable idling or an engine stall can lead to loss of control of the motorcycle, increasing the risk of an injury or crash.

Factory Remedy & Repair Action

Dealers will reprogram the engine control unit (ECU) software and replace the TPS, free of charge. Owner notification letters were mailed on May 6, 2025. Owners may contact Yamaha of Hawaii customer service at 1-808-498-8248.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1- 888-275-9171), or go to www.nhtsa.gov.
NHTSA #22V130000DO NOT OPERATE / PARK OUTSIDEENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
Received: 07/03/2022

Explore Other Subsystems for this 2018 Yamaha MT-09

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
← Return to Full Comprehensive Motorcycle Specification Hub (2018 Yamaha MT-09)

Looking for direct-fit parts for this 2018 MT-09?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts
2018 Yamaha MT-09 Suspension Settings, Fork Oil & Sag Specs | WowShopper Workshop | WowShopper Motorsports