Dedicated Subsystem WorkbenchPlatform Gen: 2017–2024

2018 Triumph Street Triple 765 (R / RS) Cylinder Compression & Leakdown Diagnostic Engine

Factory compression specs for 2018 Triumph Street Triple 765 (R / RS): standard pressure 175 - 220 PSI (1207 - 1517 kPa), service limit 142 PSI, dry vs wet test diagnostics and acoustic leak stethoscope.

Gen 2017–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2017 through 2024.

Select Model Year:(Active: 2018)

2017 2018 2019 2020 2021 2022 2023 2024

Engine

765cc

Drive

525

Cooling

Liquid-Cooled

Cylinder Compression & Leakdown Diagnostic Engine

Multi-Cylinder Dry vs. Wet Test Bench, Differential Pressure Regulator & Acoustic Stethoscope Locator

Ratio: 12.65:1Std: 175-220 PSILimit: 142 PSIWhip Adapter: M10 x 1.0

Diagnostic Presets:

Cyl #1 (Left)IN-SPEC

204PSI(1407 kPa)

Cyl #2 (Center)IN-SPEC

202PSI(1393 kPa)

Cyl #3 (Right)IN-SPEC

200PSI(1379 kPa)

Cross-Cylinder Variance: Δ 4 PSI (OEM Limit: ≤ 14 PSI)

VARIANCE IN-SPEC

All cylinders demonstrate strong, balanced mechanical sealing. Piston ring packs, cylinder cross-hatch, and valve seats are within factory specification.

Official Workshop Manual Compression Test Protocol

Step 0 of 5 Completed

Step 1: Engine Operating Temperature

Run engine until coolant reaches 60°C - 80°C (140°F - 176°F). Cylinder expansion brings rings and pistons to true operating clearances.

Step 2: Spark Plug Removal & Port Clean

Blow compressed air around spark plug wells to eject grit, then remove all spark plugs. Thread in M10 x 1.0 whip adapter hand-tight with fresh O-ring.

Step 3: Wide-Open Throttle (WOT) Lock

Hold throttle grip fully wide open (or lock throttle bodies open) to eliminate intake butterfly vacuum restriction and ensure 100% volumetric cylinder filling.

Step 4: Battery Tender Voltage Stabilization

Connect a 12V shop battery tender or booster. Starter must sustain uninterrupted cranking speed (350 RPM) to build maximum dynamic stroke pressure.

Step 5: Crank 4-6 Compression Strokes

Engage starter until gauge needle ceases rising (typically 4 to 6 strokes). Record maximum peak pressure and compare against the OEM limits above.

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2018 Triumph Street Triple 765 (R / RS) platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.