Dedicated Subsystem WorkbenchPlatform Gen: 2000–2024

2017 Suzuki DR-Z400S / SM Charging System, Stator AC Output & Battery Health

Stator 3-phase AC voltage at 5,000 RPM, coil resistance, regulated DC voltage, battery code YT7B-BS, CCA rating, and multimeter charging diagnostic steps for 2017 Suzuki DR-Z400S / SM.

Gen 2000–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2000 through 2024.

Select Model Year:(Active: 2017)

2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

Engine

398cc

Drive

520

Cooling

Liquid-Cooled

3-Phase Charging System & Battery Diagnostic Flowchart

Yuasa & OEM Standards

Multimeter troubleshooting protocols, cold cranking amps (CCA) ratings, 3-phase stator AC outputs, and regulator-rectifier health verification.

Shop YT7B-BS Batteries

OEM Battery Code

YT7B-BS (VRLA / Thin-Plate AGM)

Cold Cranking Rating

110 CCA

Capacity (10HR Rate)

6.5 Ah (12V)

Regulated Output Spec

14.0 - 14.8 V DC

Key-OFF Parasitic Limit

< 1.2 mA (Key OFF)

Enter Multimeter DC Voltage Reading

V DC

Multimeter Test Diagnosis

Enter your multimeter terminal reading on the left to view instant diagnostic interpretations and recommended workshop actions.

OEM Factory AGM BatteryExact OEM Fit

Yuasa YT7B-BS High Performance AGM Battery

Dimensions: 150 L × 65 W × 93 H mm • Weight: 5.9 lbs (2.7 kg). Pre-filled absorbed glass mat technology engineered for heavy vibration resistance.

Lithium LiFePO4 UpgradeUp to 70% Lighter

Antigravity AT7B-BS Re-Start (240 CCA / 1.8 lbs)

Features built-in RE-START jump starting reserve. Never stranded by dead lights: press the restart button on the top terminal to crank the motorcycle without jumper cables.

Smart Maintainer SpecBattery Life Extension

12V AGM / Float 0.8A

Standard Charge Rate: 0.7A (Max 1.4A). Automated desulfation & float maintenance ensures full capacity retention during off-season winter storage.

Recommended Parts: Yuasa YT7B-BS High Performance AGM Battery • OptiMate 4 Quad Program 1.0A Smart Battery Tender / Charger

Shop Smart Battery Chargers Find Direct-Fit Batteries

IGNITION ENGINEERING, HEAT-RANGES & COMBUSTION DIAGNOSTICS

OEM Spark Plugs • Heat-Range Dissipation • Coil Resistance • Visual Combustion Reading Matrix

FACTORY CERTIFIED SPECIFICATIONS

Factory Standard Plug

NGK CR8E

1 Plug (398cc Liquid-Cooled Single)

Electrode Spark Gap

0.7 - 0.8 mm (0.028 - 0.031 in)

M10 x 1.0 • 19 mm Reach

Hex Drive & Socket Spec

16 mm (5/8 in)

Use magnetic rubber-insert thin socket

Tightening Torque (NM)

13 N·m

1/2 turn after finger seat (crush washer)

Stick Coil Resistances

Pri: 0.1 - 0.5 Ω at 20°C

Sec: 12.0 - 18.0 kΩ at 20°C

Service & Replacement

Inspect: 3,500 miles (6,000 km)

Replace: 7,000 miles (11,000 km)

SPARK PLUG HEAT-RANGE & METALLURGY SELECTOR

Compare OEM standard, fine-wire precious metals, and ambient/duty cycle thermal dissipation paths

Verified Part Specification

NGK CR8E

FACTORY SPECIFICATION

Metallurgy & Center Tip Architecture

Copper Core / Solid Nickel Alloy Ground Electrode

Thermal Dissipation Path & Physics

Standard OEM factory thermal dissipation rate. Calibrated to stabilize ceramic nose temperature between 500°C–800°C across mixed street, highway, and mountain riding.

Operating Application Envelope

Stock engines, factory ECU mapping, general commuting, and standard touring. Recommended for all baseline maintenance schedules.

Ignitability & Coil Voltage Demand

Standard spark kernel size. Standard secondary coil demand (~15–20 kV). Solid copper core ensures rapid heat conduction away from tip.

SPARK PLUG READING & COMBUSTION DIAGNOSTICS ANALYZER

Interactive visual diagnosis: Match your ceramic insulator tip and electrodes to detect AFR, timing, oil intrusion, and thermal overload

Normal Clean — Optimal Combustion Equilibrium

OPTIMAL COMBUSTION

Thermal Operating Range: 500°C – 800°C (932°F – 1,472°F) • Self-Cleaning Pyrolysis Window

Visual Insulator & Electrode Profile

Ceramic insulator nose is light grayish-tan, beige, or light brown. Firing tip and electrodes are dry with minimal combustion deposits. Ground electrode edges remain crisp without rounding or erosion.

Multimeter Electrical Resistance Test

Insulation Resistance > 10 MΩ (Infinite DC resistance between center terminal and steel shell). Dielectric barrier is pristine; zero spark leakage to cylinder head ground.

Probable Root Causes

Optimal air/fuel ratio across all throttle positions (stoichiometric 14.7:1 cruise, 12.8:1–13.2:1 power enrichment)
Correct spark plug heat range precisely matched to engine displacement and cooling efficiency
Ignition timing and coil dwell saturation within factory parameters
Healthy piston rings and valve guide seals with minimal oil blow-by

Prescribed Workshop Remediation Action

No mechanical intervention required. Inspect gap with wire-style feeler gauge and reinstall to factory torque specification.

Coil-on-Plug (COP) / Stick Coil Multimeter Bench Testing Protocol

Step 1 • Primary Circuit

Set DMM to lowest Ω range. Probe between Terminal 1 (+12V switched) and Terminal 2 (ECU trigger pin). Normal reading: 0.1 - 0.5 Ω at 20°C at 20°C.

Step 2 • Secondary Circuit

Set DMM to kΩ range. Probe between Terminal 1 and the high-voltage spark plug spring terminal inside the boot. Factory spec: 12.0 - 18.0 kΩ at 20°C at 20°C.

Step 3 • Dielectric Boot Inspection

Flex silicone boot under bright light. Check for pinholes, white powdery dielectric breakdown tracks, or hardened silicone causing high-voltage flashover to the cylinder head spark plug tube.

Direct-Fit Ignition Components & Workshop Sockets

Authentic laser iridium plugs, thin-wall magnetic sockets, and OEM replacement stick coils

Find Direct-Fit Spark Plugs Thin-Wall Magnetic Sockets

Suzuki Diagnostic Fault Codes & Multimeter Bench Testing

FI & OBD2 Decoder

Authentic factory ECU fault codes, sensor resistance specifications, and harness pinout troubleshooting.

Launch Full Suzuki DTC Engine→

Code C12Crankshaft Position Sensor (CKPS)

No CKPS pulse detected while starter cranks.

Test: Measure 150-220 Ω across Green and Blue CKPS pins.

Code C28Secondary Throttle Valve Actuator (STVA)

STVA stepper motor drive circuit malfunction.

Test: Measure 6.0-10.0 Ω across STVA stepper coil pin pairs.

Code C46Exhaust Control Valve Actuator (EXCVA)

SET valve actuator position sensor or servo motor failure.

Test: Measure EXCVA potentiometer: 0.5k-4.5k Ω smoothly rotating.

Looking for other error codes, sensor pinouts, or OBD2/Euro 5 codes?

View All 68 Multi-Brand Diagnostic Trouble Codes →

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2017 Suzuki DR-Z400S / SM platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.