Dedicated Subsystem WorkbenchPlatform Gen: 2013–2026

2014 Kawasaki Ninja ZX-6R (636) Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2014 Kawasaki Ninja ZX-6R (636): intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2013–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2013 through 2026.

Select Model Year:(Active: 2014)

2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

636cc

Drive

520

Cooling

Liquid-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 7.48 mm

Active Valve Range (INTAKE)

0.11 - 0.19 mm

0.004 - 0.007 in

Nominal Mid-Spec Target

0.15 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

7.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.11 - 0.19 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align 1,4 'T' mark on timing rotor with crankcase split line; camshaft gear hash marks aligned with cylinder head upper surface

Feeler Gauge Technique

Narrow angled feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #25V798000DO NOT OPERATE / PARK OUTSIDEENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Received: 18/11/2025▼

Defect Description

Kawasaki Motors Corp., U.S.A. (Kawasaki) is recalling certain 2024-2026 Ninja ZX-6R, ZX-6R KRT Edition, ZX-6R KRT 40th Anniversary Edition ABS, ZX-6R ABS, and ZX-6R KRT Edition ABS motorcycles. The motorcycles may lose engine power during operation due to seizure of a metal crankshaft bushing.

Safety Hazard / Consequence

An engine stall increases the risk of a crash.

Factory Remedy & Repair Action

Owners are advised not to ride their motorcycles until the repair has been completed. Dealers will re-tighten the metal crankshaft bushing, free of charge. Owner notification letters were mailed December 15, 2025. Motorcycles in this recall that were previously repaired under recall 25V376 will need to have the new remedy performed, once available. Owners may contact Kawasaki customer service at (855) 878-4217.