Dedicated Subsystem WorkbenchPlatform Gen: 2008–2026

2008 Honda CBR1000RR Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2008 Honda CBR1000RR: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2008–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2008 through 2026.

Select Model Year:(Active: 2008)

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

999cc

Drive

525

Cooling

Liquid-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.13 - 0.19 mm

0.005 - 0.007 in

Nominal Mid-Spec Target

0.16 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.13 - 0.19 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align pulse rotor 'T' mark with case index; cam sprocket index marks level with head

Feeler Gauge Technique

Angled feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #09V174000ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS

Received: 21/05/2009▼

Defect Description

HONDA IS RECALLING 12,894 MY 2008 CBR1000RR MOTORCYCLES. A COOLANT HOSE CLAMP LOCATED ON THE WATER PUMP COVER MAY BREAK DUE TO FATIGUE CAUSED BY VIBRATION GENERATED AT CONTINUOUS HIGH ENGINE SPEEDS.

Safety Hazard / Consequence

IF THE CLAMP BREAKS, HOT COOLANT CAN SPRAY ONTO THE RIDERS LEFT LOWER LEG CAUSING SCALDING TO THE RIDER.

Factory Remedy & Repair Action

DEALERS WILL INSTALL THE NEW COOLANT HOSE CLAMP FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON OR BEFORE JUNE 6, 2009. OWNERS MAY CONTACT HONDA AT 866-784-1870.

Manufacturer Notes: HONDA RECALL NO. R08. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .