Dedicated Subsystem WorkbenchPlatform Gen: 2014–2026

2022 Ducati Monster / Monster Plus / 821 / 1200 Suspension Hydraulics, Fork Fluids & Sag Tuner

Front fork travel, rear shock travel, spring preload, damping click baselines, and dynamic rider sag calculator for 2022 Ducati Monster / Monster Plus / 821 / 1200.

Technical PassportOEM VERIFIED

Engine

937cc

Cooling

Liquid-Cooled

Final Drive

520 (525 on 821 / 1200) Chain

Engine Oil

3.40 L (3.59 US qt)

Spark Plug

NGK MAR9A-J

Front Tire

120/70 ZR17 (Pirelli Diablo Rosso III / IV)

Gen 2014–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2014 through 2026.

Select Model Year:(Active: 2022)
13 Production Years (2014–2026)

2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suspension Hydraulics, Fork Fluids & Interactive Sag Tuner

Showa • KYB • WP Standards

OEM hydraulic capacities, air-gap measurement standards, clicker baselines, and mathematical rider sag tuning.

Shop Fork Seals & Wipers

Fork Architecture

Inverted USD Cartridge (43mm Kayaba)

Oil Volume Per Leg

580 ml (19.6 US fl oz) per leg

OEM Fluid Specification

Shell Advance Fork 7.5W (SAE 7.5W)

Air-Gap Spec (Oil Level)

120 mm (4.72 in) compressed, spring removed

Fork Seal Dimensions

43 x 54 x 11 mm

Total Suspension Travel

Front: 130 mm • Rear: 140 mm

Target Rider Sag: 34 - 40 mm (26 - 31% of 130 mm travel)

Front Preload Baseline

Factory preset non-adjustable

Rebound Damping Baseline

1.5 turns out from fully seated

Compression Damping Baseline

Non-adjustable hydraulic cartridge

Target Free Sag (Unladen)

20 - 25 mm

Enter 3-Point Sag Measurements (mm)

L1: Extended

L2: Static Bike

L3: In Full Gear

Suspension Sag Diagnosis & Geometry Status

Enter your extended, static, and rider measurements on the left (or select a preset) to compute exact sag percentages and spring preload recommendations.

Factory Fluid StandardDirect Spec

Motul Factory Line Fork Oil 7.5W (1 Liter)

Formulated with anti-foam agents and shear-stable viscosity index improvers to prevent damping fade under aggressive riding heat.

Fork & Dust Seal KitExact Stanchion Fit

All Balls Racing 43mm Fork & Dust Seal Kit

Features directional triple-lip rubber seal profile and external garter springs engineered to withstand heavy stanchion flex without weeping.

Air-Gap Tuning PhysicsBottoming Control

120 mm (4.72 in) compressed, spring removed

Trapped air column acts as a progressive spring in final 30% of stroke. Adding +5mm oil increases bottoming resistance without stiffening small bump compliance.

Recommended Maintenance Parts: Motul Factory Line Fork Oil 7.5W (1 Liter) • All Balls Racing 43mm Fork & Dust Seal Kit

Shop Fork Fluids Find Direct-Fit Fork Seals

Official NHTSA Safety Recalls & Technical Bulletins

4 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 4 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #21V315000SERVICE BRAKES, HYDRAULIC

Received: 01/01/2021▼

Defect Description

Ducati North America (Ducati) is recalling certain 2017-2020 Monster 797, Monster 1200, Supersport, 2016-2020 XDiavel, and 2018-2020 Monster 821 motorcycles. Air may permeate the rear brake system.

Safety Hazard / Consequence

Air in the system may reduce effectiveness of the rear brakes, increasing the distance required to stop and the risk of a crash.

Factory Remedy & Repair Action

Dealers will install new rear brake hoses, free of charge. Owner notification letters were mailed on June 28, 2021. Owners may contact Ducati customer service at 1-888-391-5446.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #21V335000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Received: 01/01/2021▼

NHTSA #18V835000POWER TRAIN:MANUAL TRANSMISSION

Received: 01/01/2021▼

NHTSA #17V812000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Received: 01/01/2021▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #SRV-RCL-21-004Safety Recall 21V-315 & 21V-335 / CR211: Monster 821 & 1200 Low-Permeation Rear Brake Hose & ABS Circuit Retrofit

Source: RCSB-21V315-8478.pdf

Mandated Torques:ABS Control Unit Special Banjo Screws (51 / 55): 25 N·m ± 5% (Certification torque)Rear Master Cylinder Special Screw (53): 25 N·m ± 5% (Certification torque)Rear Caliper Special Screw (57): 25 N·m ± 5% (Certification torque)Swinging Arm Hose Grommet Screws (47): 8 N·m ± 10%Airbox M6x25 Screws: 9 N·m ± 10%

Consumable Specs:DOT 4 High Performance Brake FluidSingle-use Copper Crush Washers (Washers B, C, E, F)Self-Locking Cable Ties (Ties 65 & 66)

Genuine Part Numbers:Brake Hose A (Master Cylinder to ABS Control Unit, Chamfered Fitting)Brake Hose D (ABS Control Unit to Rear Caliper, Reinforced Shield)Copper Sealing Washers DIN 7603

NHTSA Recall 21V-315 & 21V-335Ducati Campaign SRV-RCL-21-004 / CR211

Ducati Monster 821 / 1200 Low-Permeation Rear Brake Hose & ABS Circuit

Rear brake hydraulic circuit retrofit: Low-permeation hoses, banjo screws 25 N·m with copper crush washers, swingarm clips 8 N·m & 10x ABS activation bleed test.

Brembo / ABS Safety RecallBanjo Screws 25 N·m / Bleed 10 N·m

Recall Countermeasure Components:Brake Hose A (Master to ABS)Brake Hose D (ABS to Caliper)Copper Washers B, C, E, FSelf-Locking Ties 65 & 66

NHTSA Safety Campaign 21V-315 & 21V-335 / Ducati SRV-RCL-21-004Monster 821 / Monster 1200 / SuperSport / XDiavel

Explore Other Subsystems for this 2022 Ducati Monster / Monster Plus / 821 / 1200

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.40 L (3.59 US qt) • Coolant: 2.40 L (2.54 US qt) • Brake: DOT 4

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: 11.5:1 • Std: 165-210 PSI • Limit: 142 PSI

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YT12B-BS (12V 10Ah)

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70 ZR17 (Pirelli Diablo Rosso III / IV) • Rear: 180/55 ZR17 (190/55 ZR17 on Monster 1200)

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 9,000 miles (15,000 km) mi • Valves: N/A • Plugs: Every 18,000 miles (30,000 km) mi

Open Dedicated Workbench →

← Return to Full Comprehensive Motorcycle Specification Hub (2022 Ducati Monster / Monster Plus / 821 / 1200)

Looking for direct-fit parts for this 2022 Monster / Monster Plus / 821 / 1200?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts