Amazing GOOP II MAX is the ultimate repair glue! It's toughness is unlike anything else because it remains flexible while permanently bonding virtually any material and withstanding harsh environmental elements. REAL WORLD TOUGH. REAL WORLD USE.
- UV Inhibitors - Resists yellowing or cracking when exposed to direct sunlight
- Waterproof - Tough enough to withstand very wet conditions
- Permanent - Exceptional bond strength to almost any substrate
- Temperature Resistant - Remains flexible, even in extreme temperatures
- Dries clear
- Size: 2.0 fl oz
- Color: Clear
INSTRUCTIONS FOR SAFE USEFollow these step-by-step directions when using Amazing GOOP II Max:
Read directions and test small area before use.
1. Surface should be clean, dry, and free from dirt. For best results, roughen surface before use.
2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 °F / 10 and 32 °C.
3. Apply directly to each surface to be bonded or repaired. Allow to partially cure approximately 2 minutes before mating surfaces. Hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
6. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.